Skip to content
Bahnstraße 65-67/2/2, 2230 Gänserndorf, Österreich | Tel.: +43 (0) 2282 3144|office@vitecpower.com
Vitec Power – Power Supplies Logo
  • Home
  • Products
    • Standard Power Supplies
      • AC-DC Power Supplies
      • DC/DC Power Supplies
      • High Voltage Power Supplies
      • DC/AC Inverters
      • LED Power
      • Custom Power Supplies
      • Filters & Power Management
      • Laser Power
    • Laboratory Programmable Power
      • Programmable Power Supplies
      • Battery Simulator
      • DC Electronic Load
    • Fuel cells
    • Vehicle lighting
  • Manufacturers
    • Advanced Energy
      • Artesyn
      • Excelsys
      • Ultra Volt
      • SL Power
    • Calex
      • Applications
        • Battery Management
        • Electrice Vehicle
        • Industrial
        • Railway
        • Robotics
      • Products
        • High/Mid-Range Performance DC/DC Converters
        • Low Power DC/DC Converters
        • Chassis Mount DC/DC Converters
        • AC-DC Power Supplies and Converters
    • Cincon
      • AC/DC Power Supply
        • AC-DC Brick
        • Open Frame
        • Enclosed & Din Rail
        • Wall-Mount & Desk-Top
        • Encapsulated
        • Fanless Power Solution
        • Medical Power-Solution
      • DC/DC Converters
        • DC/ DC Brick
        • DC/ DC Chassis Mount/ DIN Rail
        • DC/ DC Railway Solution
        • DC/ DC Ultra-wide Input
        • DC/ DC High Input Voltage
        • SIL/DIL
        • Accessory
    • Delta Elektronika BV
      • SM-Series
      • ES-Series
      • Interfaces/ Accessories
    • Enedo
      • AC/DC Power Supplies
      • Configurable Multi-Outputs
      • High Power LED Power Supplies
      • Medical Grade Power Supplies
      • LED Drivers
    • NGI
      • Battery Simulators
      • DC Power Supplies
      • DC Electronic Loads
      • High Voltage
    • Nolden cars & concepts
      • Front
      • Back
      • Side lights
      • Electronics & Accesories
    • LPA
      • DC/DC Converters (<100 W)
      • DC/DC Converters (>100W)
      • DC/AC Inverters
    • Power System Technology
      • Configurable AC-DC power supply
      • Eurocard Power
      • Enclosed Power
      • Conduction Cooled Power
      • PCB Board / DIN Rail Power
      • Custom Power Solutions
    • SDS High Voltage
    • SFC Energy
      • Metanol Energy Solution
      • H2 (Hydrogen)
      • Energy Storage
      • Power Supplies
      • Military
    • Vitec dc conversion
      • +/- 10% Input Range
      • 2:1 Wide Input Range
      • 4:1 Ultra Wide Input Range
      • High Isolated
      • SMD Converter
      • DC/DC Devices
      • LED Power
  • Downloads
  • Service
    • About us
    • Vitec Power Team
    • News
    • All Technical Data
    • Job offers
    • Terms and Conditions
    • Newsletter Registration
    • Disclaimer
  • EN
    • DE
    • CS
    • PL
    • TR

Military COTS MI-IAM

EMI Filtering and Transient Protection for DC/DC Converters up to 200 W for MIL Applications

  1. Home
  2. Military COTS MI-IAM
  • Overview

  • Data Sheets

  • Library

  • Design Calculators

  • Accessories

  • Overview

Description

The MI-IAM is an accessory product to Vicor’s MI-200 and MI-J00 DC-DC converters that provides EMI filtering and transient protection. Designed for use with all 28 and 270 volt input converters, the MI-IAM can drive any number of modules with output loads up to 200 watts.

The MI-IAM meets the conducted emissions specifications of MIL-STD-461C/D/E and offers complete input transient, surge and spike protection to the most severe levels of MIL-STD-704A-F, MIL-STD-1275A/B/D and DO-160E. Reverse polarity protection and overvoltage lockout provide additional safeguards against potentially damaging line conditions. High power arrays can be configured using the expansion port capability of the MI-IAM.

Specifications

Input Voltage:
  • 28 Vdc (16 – 50 Vdc)
  • 270 Vdc (125 – 400 Vdc)
Output Power:
  • Up to 200 Watts from any combination of Vicor MI-200 or MI-J00 DC-DC converter modules
Efficiency:
  • 97%
Dimensions(half brick):
  • 2.28″ x 2.4″ x 0.5″(57,9 x 61,0 x 12,7 mm)
Operating Temperature:
  • -55°C to 100°C M-Grade

Features

  • MIL-STD-461C/D/E EMI compliance
  • MIL-STD-704A-F, MIL-STD-1275A/B/D and DO-160E compliance for spikes and transients
  • MIL-STD-810 environments compliance
  • Short circuit protected
  • Expansion port for additional power
  • Data Sheets

Data Sheet

  • MI-IAM Data Sheet
  • Library

Application Notes

  • IAM Application Note
  • Soldering Methods and Procedures for Vicor Power Modules

Design Guides / Manuals

Download Entire Manual

  • VI-200, VI-J00 Design Guide and Applications Manual

Download Individual Chapters

  1. Zero-Current Switching
  2. DC-DC Converter Pinouts
  3. Module Dos and Donts
  4. Overcurrent Protection
  5. Output Voltage Trimming
  6. Multiple Gate In Connections
  7. Applications Circuits / Converter Array Design Considerations
  8. Using Boosters and Parallel Arrays
  9. EMC Considerations
  10. Optional Output Filters
  11. Battery Charger (BatMod)

Filter and Front-End Module Chapters

  1. AC Input Module (AIM / MI-AIM)
  2. Harmonic Attenuator Module (HAM)
  3. Input Attenuator Module (IAM / MI-IAM)
  4. Ripple Attenuator Module (RAM / MI-RAM)
  5. Offline Front End

Power System Chapters

  1. DC Input Power System (ComPAC / MI-ComPAC Family)
  2. AC Input Power System (FlatPAC Family)
  3. AC Input Power System (PFC FlatPAC)

General Chapters

  1. Thermal and Module Mounting Considerations
  2. Thermal Curves
  3. Lead Free Pins (RoHS)
  4. Tin Lead Pins
  5. Module Packaging Options (SlimMod, FinMod, BusMod and MegaMod Families)
  6. Product Weights
  7. Glossary of Technical Terms

Mechanical Drawings

Drawing Number Description RoHS Technical Drawing
03550 Outline Drawing for IAM Module PDF | DXF
  • Design Calculators

Design Calculators

Thermal Calculators

  • Thermal data and heat sink selection tool
  • This is a downloadable Excel file.

  • Accessories

BusMod

Terminal block for VI-J00-size modules
Description P/N RoHS Technical Drawing
Rugged chassis-mount housing for VI-J00-size module
(add-B1 suffix to module number for preinstalled)
18952 PDF | DXF

EMI Shielding

Description P/N RoHS Technical Drawing
VI-J00-size Shield with Pem Nuts 32184 PDF | DXF

Fuses

Description P/N Voltage Rating Current Rating RoHS Technical Drawing
Fuses - 3 & 5 Amps - Image PC Tron 30276 125 V 5 A PDF

Sockets & Standoffs

Sockets
Description Pin Size P/N RoHS Technical Drawing
Electro-tin finish 0.040″ 30074 PDF
Electro-tin finish 0.080″ 30075 PDF
Standoffs
Description P/N RoHS Technical Drawing
Six 0.25″ x 0.525 Long Female, 0.25″ Hex 32183-01 PDF | DXF

Thermal Management

Heat sinks used with Vicor’s VI-J00-size module (not Mini modules)
Description P/N RoHS Technical Drawing
0.90″ Longitudinal Fins 30191 PDF | DXF
0.90″ Transverse Fins 30771 PDF | DXF
0.40″ Transverse Fins 30140 PDF | DXF
Heat Sink Thermal Data and Calculator
ThermMate Thermal Pads (10 pieces per package)
Description Thickness P/N RoHS Technical Drawing
For use with Vicor VI-J00 moduels only
(not Mini modules)
0.007″ 20267 PDF | DXF
Grounding Clips
Description P/N RoHS Technical Drawing
For use with FinMod, Longitudinal 0.25″ Fins (-F1) 32185 PDF | DXF
For use with FinMod, Longitudinal 0.50″ Fins (-F2) 32185 PDF | DXF
For use with FinMod, Transverse 0.25″ Fins (-F3) 32186 PDF | DXF
For use with FinMod, Transverse 0.50″ Fins (-F4) 32186 PDF | DXF
For use with SlimMod Flangless package (-S) 32187 PDF | DXF

How to reach us!

+43 (0) 2282 3144

office@vitecpower.com

Bahnstraße 65-67/2/2
A-2230 Gänserndorf,
Österreich

Vitec Power GmbH

Product News

LFM200M

Welcome to the future of medical po [...]

CFM500S-PM

Cincon Releases CFM500S-PM Models, [...]

CSC01

Cincon CSC01 Current Sharing Module [...]

Social Media

Important Pages

  • Job offers
  • Terms and Conditions
  • Vitec Power Team

Copyright Vitec Power GmbH – Webdesign by Ostheimer OG

Page load link
Mit der weiteren Nutzung unserer Webseite erklären Sie sich damit einverstanden, dass wir Cookies verwenden um Ihnen die Nutzerfreundlichkeit dieser Webseite zu verbessern. Weitere Informationen zum Datenschutz finden Sie in unserer Datenschutzerklärung.
In OrdnungDatenschutzerklärung
Mehr über Cookies erfahren
Go to Top