The MIL-COTS VI BRICK PRM operates from a wide input range of 16 – 50 Vdc, meeting many of the ground vehicle and airborne requirements of MIL-STD-1275 and MIL-STD-704. Rated for 120 W, the 28 V PRM produces a nominal factorized bus voltage of 36 Vdc, controllable over the range of 26 – 50 Vdc. The downstream isolated VI BRICK VTM is available with twelve voltage division ratios from 1:1 to 1:32 and provides the user with flexibility to supply up to 100 A or 120 W at any output voltage from 1 to 50 Vdc in a surface-mount package occupying only 1 square inch.
The MIL-COTS VI BRICK Bus Converter Module (BCM) is a high efficiency (>96%), Sine Amplitude Converter (SAC) operating from MIL-STD-704E/F 270 Vdc and delivering an isolated 30.0 – 41.3 Vdc. The BCM is suitable for use with the MIL-COTS PRM–Regulator and VTM–Current Multiplier, and is ideal for aircraft distributed power applications.
- PRM: 16 – 50 Vdc
- VTM: 26 – 50 Vdc
- BCM: 240 – 330 Vdc
- PRM: 26 – 50 Vdc
- VTM: 0.8 – 50 Vdc
- BCM: 30.0 – 41.25 Vdc
- PRM: 120 Watts
- VTM: Up to 100 Amps
- BCM: 235 Watts
- PRM: Up to 95%
- VTM: Up to 96.5%
- BCM: Up to 95.5%
- 1.91″ x 1.09″ x 0.37″
- (48.6 x 27.7 x 9.5mm)
- Power density up to 312 W/in3
- High efficiency
- Low noise
- Fast transient response
- 100°C baseplate operation
- Flexible architecture
- Small footprint: 2.08 in2
PRM (Pre-Regulator Module)
VTM (Voltage Transformation Module)
BCM (Bus Converter Module)
- AN:002 – PRM/VTM Parallel Operation
- AN:003 – Powering Multiple VTMs with a Single PRM
- AN:005 – FPA Printed Circuit Board Layout Guidelines
- AN:009 – V•I Chip Soldering Recommendations
- AN:017 – RoHS-Compliant Through-Hole V•I Chip Soldering Recommendations
- AN:018 – Providing a Constant Current for Powering LEDs using the PRM and VTM
- AN:022 – MIL EMI and Transient Solutions
- AN:006 – A Filter Solution for the BCM
- AN:008 – V•I Chip Bus Converter Module (BCM) Thermal Management
- AN:016 – Using BCM™ Bus Converters in High Power Arrays
- MPQI-18LP – V•I Chip Input EMI Filter – The MQPI is a surface mount, DC front-end filter that provides EMI filtering for Vicor’s 28 V MIL-COTS DC_DC V•I Chip or VI BRICK modules. The MQPI enables designers to meet conducted emission / conducted susceptilibility per MIL-STD-461E.
- M-FIAM – Filter Input Attenuator Module– DC input, front-end module providing transient protection, inrush current limiting and EMI filtering for Maxi, Mini, and Micro DC-DC converters.
| Description | P/N | RoHS | Technical Drawing | |||||||||
 |
0.287″ Long, Female – Female, For 0.125″ PCB(includes M3 x 5 mm & M3 x 6 mm screws) | 12 pc.Kit | 34717 |  |
||||||||
 |
||||||||||||
| 0.287″ Long, Fem. – Fem., For 0.063″ PCB(includes M3 x 5 mm screws) | 12 pc.Kit | 34718 | |
|||||||||
|
||||||||||||
| 0.287″ Long, Female – Female | 100 pc.Bag | 34709 | |
|||||||||
|
||||||||||||
| 0.287″ Long, Male – Female(includes M3 x 6 mm screws) | 12 pc.Kit | 34719 | |
|||||||||
|
||||||||||||
| 0.287″ Long, Male – Female | 100 pc.Bag | 34710 | |
|||||||||
|
||||||||||||
| M3 x 5 mm screw with thread lock | 100 pc.Bag | 34716 | |
|||||||||
|
||||||||||||
| M3 x 6 mm screw with thread lock | 100 pc.Bag | 34715 | |
|||||||||
| ThermMate Thermal Pads (10 pieces per package) | ||||||||||||
| Description | P/N | Thickness | RoHS | Technical Drawing | ||||||||
 |
For use with Vicor VI BRICK BCM, VTM or PRM modules* | 34636 | 0.007″ | |
||||||||
| * NOT for use with other Vicor modules | ||||||||||||