Project Description
- Designed for long life at full power
- Excellent dynamic response to load changes
- Protected against all overload and short circuit conditions
- EMC surpasses CE requirements: low emission & high immunity
- Low audible noise: fan is temperature controlled
- High voltage isolation up to 1400 V
- Operation on single and three phase input voltages
- Standard Ethernet interface including sequencer
- Large user display, menu driven operation
- Durable digital encoders for voltage and current adjustment
- Plug and play optional interfaces
- USB input for exchange of settings and wave forms
| Single and three phase input | 180-528 V AC (single or three phase 48-62 Hz) derating at low input voltage |
| Active Power Factor Correction (PFC) | up to 0.99 (at 100% load) |
| Efficiency | up to 92% (at full load) |
| Output ripple and spikes | from 3 mVrms / 12 mVpp |
| Regulation | from 2.5 mV (0-100% load step) |
| Recovery time | from 100 μs (50-100% load step) |
| Programming speed | from 1.6 ms (10-90%), optional from 0.17 ms |
| Analog programming accuracy | from 0.2% |
| Output voltage and current stability | 6.10-5 / 9.10-5 |
| MTBF | 500.000 hrs |
| Operating ambient temperature | -20 to +50 °C |
| Power supply standard | EN 61204-3 |
| Generic Emission | EN 61000-6-3 (EN 55022B) |
| Generic Immunity | EN 61000-6-2 |
| Safety | EN 60950 / EN 61010 |
| Insulation input / output | 3750 Vrms |
| Enclosure | IP20 |
Width = 19″
Height = 2 U
Depth = 455 mm
Weight = 15 kg
| Partnumber | Voltage range | Current range |
|---|---|---|
| SM 18-220 | 0 – 18 V | 0 – 220 A |
| SM 66-AR-110 (Autoranging output) | 0 – 33 V 0 – 66 V |
0 – 110 A 0 – 55 A |
| SM 330-AR-22 (Autoranging output) | 0 – 165 V 0 – 330 V |
0 – 22 A 0 – 11 A |
| SM 660-AR-11 (Autoranging output) | 0 – 330 V 0 – 660 V |
0 – 11 A 0 – 5.5 A |
 |
Two-Quadrant Output: Power Sink | |
|---|---|---|
| Two quadrant operation maintains the output voltage constant regardless the output power is positive or negative. Ideal for PWM-speed controlled DC-motors and ATE-systems. | ||
 |
High Speed Programming | |
| A 10 to 20 times higher programming speed and lower output capacitance. Excellent for laser applications, test systems or as current source with low parallel capacitance as used in plasma chambers. | ||
 |
Software Control and Interfaces | |
Field installable interfaces:
|
||
| Downloads | Document format | Size |
|---|---|---|
| Data sheet SM3300-Series | PDF (Acrobat Reader) | 500.1 KB |
| Firmware SM3300-Series H0 P0110 (version 21-02-2013) | Firmware | 5.7 MB |
| SM3300 Firmware Release Note | PDF (Acrobat Reader) | 98.8 KB |
| Software SM3300-Series | Software | 5.1 MB |
| Manual SM3300 Ethernet & Sequencer | PDF (Acrobat Reader) | 1.5 MB |
| Data sheet Power Sink SM3300 | PDF (Acrobat Reader) | 649.0 KB |
| Driver Serial Interface Module | Software | 6.8 MB |
| Application note Safe Operation Power Supply | PDF (Acrobat Reader) | 102.1 KB |
