MIL-COTS MFM™ Filter Module
Input filter for DCMs in a VIA package
The MFM DCM™ Filter is a DC front-end module that provides EMI filtering and transient protection. The MFM DCM Filter enables designers using the Vicor 28 or 270V nominal input voltage modules in a VIA™ or ChiP™ [a] package to meet conducted emission/conducted susceptibility per MIL-STD-461E/F; and input transients per MIL-STD-704 or MIL-STD-1275. The MFM DCM Filter accepts an input voltage of 16 – 50VDC (28VIN ) or 160 – 420VDC (270VIN ) and delivers output power up to 640W.
[a]Additional components are required for EMI when used with ChiP modules.
Part Number | Input Voltage | Output Current | Transient Compliance | Module Compatibility | Dimensions | |
MFM3314xD2KD2F0yzz | 160 – 420 | 4 |
|
270 Vin DCM ChiPs | 3.31 x 1.41 x 0.42 in
84.04 x 35.93 x 10.57 mm |
|
MFM1714xD2KD2F4yzz | 160 – 420 | 4 | MIL-STD-704F | 270 Vin DCM VIA and ChiPs | 1.76 x 1.40 x 0.36 in 44.6 x 35.5 x 9.2 mm |
|
MFM1714x50M50C5yzz | 16 – 50 | 22 | MIL-STD-1275A/B/D/E MIL-STD-704A/F |
28 Vin DCM VIA and ChiPs | 1.76 x 1.40 x 0.36 in 44.6 x 35.5 x 9.2 mm |