Description

The Cool-Power family’s very high-density isolated DC-DC converters are built on a proprietary ZVS topology using advanced control silicon integration, state-of-the-art planar magnetics and high-performance power semiconductor technology enabling high-switching frequencies.

The Cool-Power® MIL-COTS PI3106 is a very high density isolated DC-DC converter implementing high efficiency soft-switching power architecture. The MIL-COTS PI3106 operates over a wide range input of 16 V to 50 Vdc, delivering 50 W of output power (12 Vout @ 4.2 A), yielding an unprecedented power density of 334 W/in3.

The MIL-COTS PI3106 is available in a space saving surface mountable 0.87″ x 0.65″ x 0.27″ package, achieving ~50% space reduction versus conventional solutions.

Input Voltage:
  • 28 V (16 – 50V)
Output Voltage:
  • 12 V Regulated (+/-3% over line / load / temp.)
Output Power:
  • 4.2 A / 50 W
Efficiency:
  • Up to 88%
Input-to-Output Isolation:
  • 2250 V
Output Voltage Trim:
  • Vout +10/-20%
Dimensions:
  • 0.87″ (l) x 0.65″ (w) x 0.265″ (h)22 mm (l) x 16.5 mm (w) x 6.7 mm (h)
Operating Junction Temperature:
  • -55 to 125°C
Storage Temperature:
  • -65 to 125°C

  • Power density 105 W/in2 & 400 W/in3 (16.5 W/cm2 & 25 W/cm3)
  • Very low profile (0.265 in / 6.7 mm)
  • Combines Isolation, Output Regulation & Voltage Transformation into one high density, surface mount Power-System-in-Package (PSiP)
  • Built on proprietary ZVS topology using state-of-the-art technologies to enable switching frequencies in excess of 1 MHz, enabling very small size (0.57in2)
  • Programmable soft-start, remote on/off ENABLE, accurate temperature monitor function
  • Input over-voltage & under-voltage lockout with auto-restart.
  • Over-temperature and output over-voltage protection with auto-restart
  • Dual current limit threshold to protect against short circuits and overload conditions
  • Simple solution with very few external components

Description

The Cool-Power family’s very high-density isolated DC-DC converters are built on a proprietary ZVS topology using advanced control silicon integration, state-of-the-art planar magnetics and high-performance power semiconductor technology enabling high-switching frequencies.

The Cool-Power® MIL-COTS PI3108 is a very high density isolated DC-DC converter implementing high efficiency soft-switching power architecture. The MIL-COTS PI3108 operates over a wide range input of 16 V to 50 Vdc, delivering 33 W of output power (3.3 Vout @ 10 A), yielding an unprecedented power density of 334 W/in3.

The MIL-COTS PI3108 is available in a space saving surface mountable 0.87″ x 0.65″ x 0.27″ package, achieving ~50% space reduction versus conventional solutions.

Input Voltage:
  • 28 V (16 – 50V)
Output Voltage:
  • 3.3 V Regulated (+/-3% over line / load / temp.)
Output Power:
  • 10 A / 33 W
Efficiency:
  • Up to 88%
Input-to-Output Isolation:
  • 2250 V
Output Voltage Trim:
  • Vout +10/-20%
Dimensions:
  • 0.87″ (l) x 0.65″ (w) x 0.265″ (h)22 mm (l) x 16.5 mm (w) x 6.7 mm (h)
Operating Junction Temperature:
  • -55 to 125°C
Storage Temperature:
  • -65 to 125°C

  • Power density 88 W/in2 & 334 W/in3 (14 W/cm2 & 20 W/cm3)
  • Very low profile (0.265 in / 6.7 mm)
  • Combines Isolation, Output Regulation & Voltage Transformation into one high density, surface mount Power-System-in-Package (PSiP)
  • Built on proprietary ZVS topology using state-of-the-art technologies to enable switching frequencies in excess of 1 MHz, enabling very small size (0.57in2)
  • Programmable soft-start, remote on/off ENABLE, accurate temperature monitor function.
  • Input over-voltage & under-voltage lockout with auto-restart.
  • Over-temperature and output over-voltage protection with auto-restart
  • Dual current limit threshold to protect against short circuits and overload conditions
  • Simple solution with very few external components

Description

The Cool-Power family’s very high-density isolated DC-DC converters are built on a proprietary ZVS topology using advanced control silicon integration, state-of-the-art planar magnetics and high-performance power semiconductor technology enabling high-switching frequencies.

The Cool-Power® MIL-COTS PI3109 is a very high density isolated DC-DC converter implementing high efficiency soft-switching power architecture. The MIL-COTS PI3109 operates over a wide range input of 16 V to 50 Vdc, delivering 50 W of output power (5 Vout @ 10 A), yielding an unprecedented power density of 334 W/in3.

The MIL-COTS PI3109 is available in a space saving surface mountable 0.87″ x 0.65″ x 0.27″ package, achieving ~50% space reduction versus conventional solutions.

Input Voltage:
  • 28 V (16 – 50V)
Output Voltage:
  • 5 V Regulated (+/-3% over line / load / temp.)
Output Power:
  • 10 A / 50 W
Efficiency:
  • Up to 88%
Input-to-Output Isolation:
  • 2250 V
Output Voltage Trim:
  • Vout +10/-20%
Dimensions:
  • 0.87″ (l) x 0.65″ (w) x 0.265″ (h)22 mm (l) x 16.5 mm (w) x 6.7 mm (h)
Operating Junction Temperature:
  • -55 to 125°C
Storage Temperature:
  • -65 to 125°C

  • Power density 105 W/in2 & 400 W/in3 (16.5 W/cm2 & 25 W/cm3)
  • Very low profile (0.265 in / 6.7 mm)
  • Combines Isolation, Output Regulation & Voltage Transformation into one high density, surface mount Power-System-in-Package (PSiP)
  • Built on proprietary ZVS topology using state-of-the-art technologies to enable switching frequencies in excess of 1 MHz, enabling very small size (0.57in2)
  • Programmable soft-start, remote on/off ENABLE, accurate temperature monitor function.
  • Input over-voltage & under-voltage lockout with auto-restart.
  • Over-temperature and output over-voltage protection with auto-restart
  • Dual current limit threshold to protect against short circuits and overload conditions
  • Simple solution with very few external components

Description

The Cool-Power family’s very high-density isolated DC-DC converters are built on a proprietary ZVS topology using advanced control silicon integration, state-of-the-art planar magnetics and high-performance power semiconductor technology enabling high-switching frequencies.

The Cool-Power® MIL-COTS PI3111 is a very high density isolated DC-DC converter implementing high efficiency soft-switching power architecture. The MIL-COTS PI3111 operates over a wide range input of 16 V to 50 Vdc, delivering 50 W of output power (18 Vout @ 3.3 A), yielding an unprecedented power density of 334 W/in3.

The MIL-COTS PI3111 is available in a space saving surface mountable 0.87″ x 0.65″ x 0.27″ package, achieving ~50% space reduction versus conventional solutions.

Input Voltage:
  • 28 V (16 – 50V)
Output Voltage:
  • 15 V Regulated (+/-3% over line / load / temp.)
Output Power:
  • 3.3 A / 50 W
Efficiency:
  • Up to 88%
Input-to-Output Isolation:
  • 2250 V
Output Voltage Trim:
  • Vout +10/-20%
Dimensions:
  • 0.87″ (l) x 0.65″ (w) x 0.265″ (h)22 mm (l) x 16.5 mm (w) x 6.7 mm (h)
Operating Junction Temperature:
  • -55 to 125°C
Storage Temperature:
  • -65 to 125°C

  • Power density 105 W/in2 & 400 W/in3 (16.5 W/cm2 & 25 W/cm3)
  • Very low profile (0.265 in / 6.7 mm)
  • Combines Isolation, Output Regulation & Voltage Transformation into one high density, surface mount Power-System-in-Package (PSiP)
  • Built on proprietary ZVS topology using state-of-the-art technologies to enable switching frequencies in excess of 1 MHz, enabling very small size (0.57in2)
  • Programmable soft-start, remote on/off ENABLE, accurate temperature monitor function.
  • Input over-voltage & under-voltage lockout with auto-restart.
  • Over-temperature and output over-voltage protection with auto-restart
  • Dual current limit threshold to protect against short circuits and overload conditions
  • Simple solution with very few external components