RAM™ Ripple Attenuator Module
Output ripple attenuator for VI-200/VI-J00
The RAM (Ripple Attenuator Module) may be connected to VI-200 or VI-J00 converters, FlatPACs™, ComPACs™ or MegaMods™, with output voltages from 5 to 50V, to limit total output noise to less than 3mV peak-to-peak at loads up to 20A. Combining active and passive filtering, the RAM attenuates both low-frequency input power source harmonics and high-frequency switching components in the frequency range of DC to 20MHz, while exhibiting efficiencies of 93 – 99%. No adjustments are required and remote sense and output voltage trim features are retained.
The RAM offers power systems architects a single, flexible, component-level solution to almost any clean-power problem. It also eliminates the space, efficiency and weight penalties associated with linear power sources, and the stability, efficiency, and adjustment penalties associated with external add-on filters for conventional switchers.
Part Number | Grade | Power | RoHs Compliant | |
VI-RAM-M2 | –55°C to +100°C | Up to 20 Amps | No | |
VI-RAM-M1 | –55°C to +100°C | Up to 10 Amps | No | |
VI-RAM-I2 | –40°C to +100°C | Up to 20 Amps | No | |
VI-RAM-I1 | –40°C to +100°C | Up to 10 Amps | No | |
VI-RAM-E2 | –10°C to +100°C | Up to 20 Amps | No | |
VI-RAM-E1 | –10°C to +100°C | Up to 10 Amps | No | |
VI-RAM-C2 | –25°C to +100°C | Up to 20 Amps | No | |
VI-RAM-C1 | –25°C to +100°C | Up to 10 Amps | No | |
VE-RAM-M2 | –55°C to +100°C | Up to 20 Amps | Yes | |
VE-RAM-M1 | –55°C to +100°C | Up to 10 Amps | Yes | |
VE-RAM-I2 | –40°C to +100°C | Up to 20 Amps | Yes | |
VE-RAM-I1 | –40°C to +100°C | Up to 10 Amps | Yes | |
VE-RAM-E2 | –10°C to +100°C | Up to 20 Amps | Yes | |
VE-RAM-E1 | –10°C to +100°C | Up to 10 Amps | Yes | |
VE-RAM-C2 | –25°C to +100°C | Up to 20 Amps | Yes | |
VE-RAM-C1 | –25°C to +100°C | Up to 10 Amps | Yes |