Advanced Energy’s UltraVolt V series of regulated DC-to-DC converters provide high voltage power in a lightweight, small-footprint package that is ideal for biasing applications where PCB board space is limited.

  • Maximum Output Voltage/Power: 3 kV DC/1 W
  • Type: Single output
  • Ripple: < 100 ppm
  • Control Interface: Analog
  • Temperature Coefficient: 100 ppm/⁰C


Overview

  • The UltraVolt V series offers seven models ranging from 600 to 3000 VDC of maximum high voltage power. They are available in either single-output positive or negative polarities. The V series modules deliver up to 1 W of power from a 5, 12, 15, or 24 VDC input. Protection against reversed input polarity, short circuits, and arcing is standard. With a footprint under 1 in² (6.45 cm²), these modules are perfect for applications with limited board space.

Benefits

  • Meet product packaging requirements
  • Design power subsystems around product needs — not high voltage module constraints
  • Achieve higher precision than proportional-control high voltage supplies
  • Enhance application performance through responsive control of high voltage output
  • Increase power subsystem robustness and reliability

Features

  • Small-footprint, lightweight, PCB-mountable package
  • Wide selection of input and output voltage configurations
  • Low output ripple, temperature coefficient, and line regulation (Analog interface with integral voltage control and voltage/current monitors)
  • Integrated reverse polarity, short-circuit/arc, and overcurrent protection

Electrical

Input Voltage 5, 12, 15, or 24 VDC (positive polarity only)
High Voltage Outputs Single (positive or negative polarity)
Maximum Power Output 0.5, 0.8, or 1 W
Temperature Coefficient 100 ppm/⁰C


High Voltage Output Range

0.6V 0 to 600 VDC
1V 0 to 1000 VDC
1,25V 0 to 12500 VDC
2V 0 to 2000 VDC
2,5V 0 to 2500 VDC
3V 0 to 3000 VDC


Ripple

0.6V < 100 ppm
1V < 100 ppm
1,25V < 100 ppm
2V < 100 ppm
2,5V < 100 ppm
3V < 100 ppm


Environmental

Operating Temperature Range -10 to 65⁰C (14 to 149⁰F) case temperature
Storage -40 to 70⁰C (-40 to 158⁰F) case temperature
Humidity 0 to 95% RH, non-condensing


Mechanical

L x W x H 46 x 12 x 25 mm (1.81 x 0.47 x 0.98 in)
Volume 13.8 cm3 (1.0 in3)
Weight 35 g (1.2 oz)
Case Construction Tin-plated steel
Encapsulation Silicone-based RTV or Epoxy (model-specific)


Interface

Interface Analog (positive or negative polarity), -EI interface option available
Control Signal Levels Voltage: 0 to 2.5 VDC or 0 to 5 VDC (full-scale) depending on module-supply voltage

Current: Monitoring via a 0 to 2.5 VDC or 0 to 5 VDC return signal depending on model
Control Accuracy Voltage Output: ± 1%
Monitor Accuracy Voltage Output: ± 2%

Current Output: ± 2% (-EI interface only)
HV Output Enable/Disable Yes


Options & Accessories

Flying Leads Shielded and unshielded cables safely route high voltage output without system redesign