Description

The HAM module is a full-wave rectifier with a proprietary high frequency zero-current switching (ZCS) boost converter providing up to 675 watts of power in a package measuring only 2.4″ x 4.6″ x 0.5″.

The combination of the High Boost HAM-xL and our V375, VI-26x or VI-J6x DC-DC converters provides the power train for a high density, switching power supply meeting EN61000-3-2 requirements for harmonic current content with a power factor better than 0.99. The user need only add Vicor's 30205 line filter and hold-up capacitance.

Input Voltage:
  • 85 – 264 Vac: 50/60 Hz
Output Power(per module):
  • Up to 675 W
Efficiency:
  • up to 94% (typical)
Dimensions(full brick):
  • 4.6″ x 2.4″ x 0.5″ (116,9 x 61,0 x 12,7 mm)
Configurations:
  • HAM-xx Driver HAM – Fully configured power factor correcting front end.
  • HAMD-xx Driver HAM – No internal bridge rectifier or synchronization diodes.
  • BAMD-xx Booster HAM – Companion module to HAMD-xx used for additional output power. No internal bridge rectifier.

  • Near unity power factor
  • Meets EN61000-3-2 for line current harmonic content
  • Short circuit protection
  • Input surge limiting with recommended filter
  • Module enable
  • Universal input: 85 to 264 Vac

Download Entire Manual

  • cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1
  • CB Certificate – IEC 60950-1:2001
  • CE Marked – Low Voltage Directive (2006/95/EC)
  • CE Marked – Low Voltage Directive (2006/95/EC) and RoHS Recast Directive (2011/65/EU)
  • cURus – UL 60950-1, CSA 60950-1

Mechanical Drawings

HAM Modules
2-D Full-Size VI-200 / VE-200 DC-DC Converter Module Drawings
Drwg. Number Description Download RoHS
05429 Outline drawing for HAM Module DXF | PDF
3-D Full-Size VI-200 / VE-200 Module (referring to drawing number 05429)
Non-RoHS, HAM Module (VI-200 series size package) STEP | 3D PDF
RoHS, HAM Module (VI-200 series size package) STEP | 3D PDF
HAM Filter Module
Drwg. Number Description Download RoHS
32723 Outline drawing for HAM Filter Module DXF | PDF

HAM Line Filter

External filter to meet international standards for EMI / RFI emissions and incorporates transient surge protection for the Vicor Harmonic Attenuator Module.

Description
P/N
Data Sheet
RoHS
Technical Drawing
Line Filter for use with VI-HAM
30205

Description P/N Capacitance Voltage Rating RoHS Technical Drawing
Capacitors
Y Type Capacitors A - Image Y-Cap 01000 4,700 pF 250 Vac PDF | –
Y-Cap Surface Mount 25283 4,700 pF 250 Vac PDF | –
MOVs
14 mm Disc 30076 275 V PDF | –

Description P/N RoHS Technical Drawing
VI-200-size Shield with Pem Nuts 30139 PDF
VI-200 -size Shield without Pem Nuts 32175 PDF

Description P/N Capacitance Height
of HUB		 RoHS Technical Drawing
Holdup Box HUB270-P 270 µF 1.75″ PDF | DXF
Holdup Box HUB470-P 470 µF 2.34″ PDF | DXF
Holdup Box HUB820-P 820 µF 3.52″ PDF | DXF
HUB contains two (2) capacitors of the value shown.
Mounting Connector Kit
Kit includes one connector and pins 21395

Description P/N Voltage Rating Current Rating RoHS Technical Drawing
Bridge Rectifier 30660 600 V 1 V PDF | –

Sockets
Description Pin Size P/N RoHS Technical Drawing
Electro-tin finish 0.040″ 30074 PDF | –
Electro-tin finish 0.080″ 30075 PDF | –
Standoffs
Description P/N RoHS Technical Drawing
Six 0.25″ x 0.525 Long Female, 0.25″ Hex 32183-01 PDF | DXF

Heat sinks used with Vicor's BatMod module (not for Maxi modules)
Description P/N RoHS Technical Drawing
0.90″ Longitudinal Fins 30089 PDF | DXF
0.90″ Transverse Fins 30090 PDF | DXF
0.70″ Longitudinal Fins 30775 PDF | DXF
0.70″ Transverse Fins 30193 PDF | DXF
1.45″ Longitudinal Fins 30780 PDF | DXF
0.40″ Transverse Fins 30194 PDF | DXF
Heat Sink Thermal Data and Calculator »
ThermMate Thermal Pads (10 pieces per package)
Description Thickness P/N RoHS Technical Drawing
For use with Vicor BatMod modules* 0.007″ 20266 –
* NOT for use with Vicor Maxi modules
Grounding Clips
Description P/N RoHS Technical Drawing
For use with FinMod, Longitudinal 0.25″ Fins (-F1) 32185 PDF | DXF
For use with FinMod, Longitudinal 0.50″ Fins (-F2) 32185 PDF | DXF
For use with FinMod, Transverse 0.25″ Fins (-F3) 32186 PDF | DXF
For use with FinMod, Transverse 0.50″ Fins (-F4) 32186 PDF | DXF
For use with SlimMod Flangless package (-S) 32187 PDF | DXF