Project Description
- Voltage and current programming and monitoring
- Uses existing IP-networks
- Integrated sequencer
- Software calibration
- Isolated digital user in- and outputs
- Factory installed or external module
Interface
- Monitoring status outputs: ACF, DCF, CC-mode, Over Temp, PSOL etc.
- Isolated user inputs (8) and outputs (6)
- Software calibration for off -set and full scale
- Optional 19” rack mounting for external PSC ETH module for ES-Series
Integrated sequencer
- Converts power supply into an arbitrary waveform generator
- Stand-alone automation like a PLC
- 25 free programmable sequences, 2000 steps each
- Combination of very fast and slow sequences
- Possibility to create loops, sub-routines, ramps etc.
| Programming and monitoring resolution | 16 bit |
| Linearity error | +/- 2 LSB (prg.) +/- 1 LSB (mon.) TC = 10 ppm / °C |
| Input voltage (external module) | 98-264 V AC (48-62 Hz) |
| Generic Emission | EN 61000-6-3 (EN 55022B) |
| Generic Immunity | EN 61000-6-2 |
| Safety | EN 60950 / EN 61010 |
| Insulation inputs/outputs to case | 1000 VDC |
| Enclosure | IP20 |
Width = 86 mm
Height = 89 mm
Depth = 119 mm
Weight = 0.7 kg
 |
Ethernet Controller | |
|---|---|---|
| A 16 bit Ethernet interface for programming and monitoring. | ||
 |
Sequencer | |
| Arbitrary Waveform generator or standalone automation. The sequencer is integrated in the Ethernet controller. | ||
| Downloads | Document format | Size |
|---|---|---|
| Data sheet PDC-ETH | PDF (Acrobat Reader) | 73.6 KB |
| Data sheet PSC-ETH Software | PDF (Acrobat Reader) | 372.3 KB |
| Software PSC-ETH | Software | 121.6 MB |
| Application note PSC ETH Linking Sequences | PDF (Acrobat Reader) | 39.2 |
