Project Description
- Selectable 0-5 V and 0-10 V signal levels
- Isolated programming and monitoring of U, I and status signals
- Prevents problems with earth loops and CM-voltages
- Factory installed or external module
- Pin compatible with Delta Elektronika programming connector
- ISO AMP Card fits in SM800, SM1500, SM3000 and SM6000
- ISO AMP Module for an external solution
- Internal interface cards are factory fitted and calibrated
| Programming and monitoring offset | +/- 60 μV typical |
| Full scale error | 0.1% calibrated |
| Non-linearity | 0.01% typical, TC = -65 ppm / °C |
| Common mode rejection | 80 dB @ 50 Hz |
External module
| Generic Emission | EN 61000-6-3 (EN 55022B) |
| Generic Immunity | EN 61000-6-2 |
| Safety | EN 60950 / EN 61010 |
| Insulation input / output to case | 1000 Vrms |
| Enclosure | IP20 |
External module
Width = 79 mm
Height = 50 mm
Depth = 124 mm
Weight = 0.4 kg
Width = 79 mm
Height = 50 mm
Depth = 124 mm
Weight = 0.4 kg
| Downloads | Document format | Size |
|---|---|---|
| Data sheet ISO AMP | PDF (Acrobat Reader) | 86.5 KB |
