Die Vicor Corporation entwickelt, fertigt und vermarktet modulare Stromversorgungskomponenten und komplette konfigurierbare und kundenspezifische Stromversorgungssysteme. Diese werden vorrangig von OEMs in den Industriebereichen Kommunikationstechnologie, Datenverarbeitung, Steuerungstechnik, Test- und Messinstrumente, Medizintechnik, Luftfahrt und Wehrtechnik eingesetzt. Unterhalb finden Sie die Produktübersicht für Industrielle Anwendungen.
Vicor MIL-COTs Produkte finden Sie hier.
Produktübersicht Vicor
Image
Description
Datasheet
Input
Output
Power
- Integrated filtering
- Remote or local sense
- Efficiency: Up to 93 %
- Isolated and Parallelable
11 Input Ranges:
9 – 420 Vdc3,3 – 48 Vdc35 – 600 W- Output Voltage Adjustable
- Logic Enable / Disable
- Efficiency: Up to 90%
- Isolated and Parallelable
8 Input Ranges:
9 – 425 Vdc2 – 54 Vdc50 – 600 W- Output Voltage Adjustable
- Logic Enable / Disable
- Remote Sense, Current Limit
- Isolated and Parallelable
12 Input Ranges:
10 – 400 Vdc2 – 95 Vdc25 – 200 W- PRM: Non-isolated Regulator
- VTM: Isol. Voltage Transformer
- High Efficiency up to 97%!
- Power Density >1,300 W/in3
4 Input Ranges:
18 - 75 Vdc1.19 - 55 Vdc120 – 400 W- High Efficiency up to 96%
- High Power Density
- Small Footprint
- Isolated Output
6 Input Ranges:
38 - 55 Vdc
330 - 365 Vdc2.1 - 51.3 Vdc210 – 325 W- Very High Power Density
- +/-10% Output Voltage Trim
- Efficiency up to 88%
- Extremely Small Footprint
36 - 75 Vdc
8 - 36 Vdc
41 - 57 Vdc3.3 Vdc
12 Vdc
18 Vdc10 to 60 W- Non-isolated POL converter
- LGA SIP: 10 x 14 x 2.56 mm
- Frequency synchronization
- Up to 96.5% peak Efficiency
8 to 18 Vdc
and
8 to 36 Vdc1 to 16 Vdc8 A, 10 A,
and
15 A versions- Industry Standard Eighth- and Quarter-Brick
- High Efficiency: up to 98.2%
- High Density: 240 W/in²
38 – 55 Vdc
or
36 – 60 Vdc4:1 and 5:1
fixed ratio!
12 and 9.6 V
at 48 Vin300 – 850 W
Image
Description
Datasheet
Input
Outputs
Vout
Power
- 8 Package Configurations
- Low Profile
- Coldplate Chassis
- High Temperature Capability
10 - 425 Vdc1 - 42 - 54 Vdcup to 750W- 3 Package Configurations
- Low profile
- Efficiency up to 80 – 90%
- EN55022, Class B
24 Vdc
48 Vdc
300Vdc1 - 31 - 95 Vdcup to 600W- 6 Package Configurations
- Chassis Mount
- Efficiency up to 80 – 90%
- Multiple Outputs
10 - 400 Vdc1 - 32 - 95 Vdc25 - 600W- Soft Start
- Limited Inrush Current
- Fan Cooled
- Output Overcurrent Protection
10 - 100 V1 - 162 - 95 Vdcup to 1600W- Universal AC Input
- Low profile package
- Up to 6 Outputs
- High Power Density
100 - 300 Vdc1 - 61 - 285 Vdcup to 1500W- User Configurable Outputs
- Slide-in Output Assemblies
- 6 Package Configurations
- Low Leakage Option
PFC models: 100 - 300Vdc
3-phase-models: 260 - 352 Vdc1 - 401 - 400 Vdcup to 4000W
Image
Description
Datasheet
Type
Input
Power
- CM and DM Attenuation
- Hot Swap Models
- Efficiency: >99% at full load
- Operat. Temp.: -40 to +100°C
Inputdifferent models between
5 - 80 Vdcup to 14 A- DC Input Front-End Module
- EMI Filtering
- Transient Protection
- VI-J00 & VI-200 Compatible
Input24, 48, 300 Vdcup to 400 W- DC Input Front-End Module
- Inrush Current Limiting
- Transient Protection
Input36 - 76 Vdcup to 20 A- >30dB PARD Attenuation
- Efficiency: Up to 99%
- Small Footprint
- High Density
Outputdifferent models between
0.3 - 30 Vdcup to 20 A- Reduces Ripple to <3mV pp
- Full Attenuation up to 20 A
- No Adjustment Required
Output5 - 50 Vdcup to 20 A- >40dB Ripple Attenuation
- Reduces Ripple to <10 mV pp
- 20 and 30 Ampere Ratings
Output3 -30 Vdcup to 30 A
Image
Description
Datasheet
Input
Outputs
Vout
Power
- Configurable Power Supply
- 3 Package Configurations
- 40 ms Hold Up
- Overvoltage Protection
115/230 Vac, Autoranging1 - 32 - 95 VdcUp to 600 W- EN 61000-3-2A14
- Autosense feature
- Compliant to EN 55022, Class A
- RS-232 Interface
90-132 / 290-264 Vac, Autoranging1 - 41 - 95 Vdcup to 500 W- Cold Plate or Heatsink Cooled
- Low Profile
- Inrush Current Limiting
- Transient Protection
115/230 Vac, Autoranging1 - 32 - 48 VdcUp to 900 W- RoHS compliant
- Power factor corrected
- Autosense Feature
- High Power Density:
85 – 264 Vac Universal1 - 61 - 285 VdcUp to 1,500 W- Five Package Configurations
- Conduction or Fan
- 19" Rack-Mount, 1U
- ON/OFF Control Input
24/48/300 Vdc, 85-230 Vac Autoranging1 - 61.8 - 52 Vdc, up to 160AUp to 1500 W- Configurable Power Supply
- 6 Package Configurations
- RoHS Compliant
- Up to 40 Outputs
85-264 Vac
or 208/240 Vac 3-Phase1 - 401 - 400 Vdcup to 4000 W
Image
Description
Datasheet
Input
Power
Efficiency
- Active PFC
- 24 and 48 Vdc Isolated and Regulated Output
85 - 264 Vac
47 - 63 Hz400 Wup to 93%- Isolated AC-DC converter with PFC
- Low profile
- 48V Isolated and regulated output
85 - 264 Vac
47 - 63 Hz330 W> 92 %- Active PFC
- Isolated AC-to-DC Converter
- 48 Vdc Semi-Regulated Output
85 - 264 Vac
47 - 63 Hz330 Wup to 93%- Active PFC Front-End Module
- Meets EN61000-3-2
- Short circuit protection
85 – 264 VacUp to 675 Wup to 94%- AC Front End Module
- EMI/RFI Filtering
- Transient Protection
85 – 264 Vac250 Wup to 97%- AC Bus OK Indication
- Module Enable Control
- Inrush Limiting (no Externals)
90-132 Vac
180-264 Vacup to 1500 W96 – 98%
(typical)- Autoranging Line Rectification
- EMI Filtering
- Transient Protection
90-132 Vac
180-264 Vacup to 1000 W96%
(typical)- EMI filtering to EN55022 B
- Harmonic Current Attenuation to EN61000-3-2
90-132 Vac
180-264 Vac575 W94 – 97%
(typical)
Image
Description
Datasheet
- Picor presents the Cool-ORing™ Family of full-function Active ORing solutions (PI2121, PI2122, PI2123, PI2125) and discrete Active ORing controllers (PI2001, PI2002, PI2003). These solutions address the requirements of redundant power architectures implemented in today’s high-availability systems such as servers, high-end computing and telecom and communications infrastructure systems.
- Evaluation boards are available to simplify testing and reduce development time for customers.
- Thermal accessories including fins, thermal pads, push pins and heat sinks are specially designed for Vicor's DC-DC converter modules and VIPAC Arrays.
- Socket accessories are designed to work with most Maxi, Mini, Micro and VI-200 / VI-J00 product series DC-DC converters and accessory modules.
- Standoff kits are designed for Maxi, Mini, Micro and VI-200 / VI-J00 product series DC-DC converters using InMate, SurfMate, or solder mounted modules.
- We offer a wide variety of capacitor products, including tantalum, ceramic, aluminum electrolytic, and surface mount low ESR polymers.
- Used to control AC current and voltage and filter out unwanted electronic signals, our line of magnetics accessories provide high reliability at a low cost.
- Mating connectors, holdup boxes, and interconnects designed specifically for VIPAC Array and VIPAC Power Systems.
- We offer a full range of power component accessories including diodes, rectifiers, fuses, MOVs, and test jacks.
- These Current Share Boards have the ability to divide the output current evenly across active paralleled VI-200/J00 and Maxi, Mini and Micro DC-DC converters.
- Module shields provide EMI shielding around the belly (label side) of Vicor DC/DC converter.
- Vicor provides mating connectors and bus bars specially designed to work with Vicor's power supply products.