The MPM series offers a unique range of low-cost, general-purpose high voltage DC-to-DC converters.

  • Maximum Output Voltage/Power: 3 kV DC/1.5 W
  • Type: Single output
  • Ripple: < 5000 ppm
  • Control Interface: Proportional
  • Temperature Coefficent: < 300 ppm/°C


Overview

  • Advanced Energy’s UltraVolt MPM series of reliable, general-purpose high voltage modules features eight compact, PCB-mountable form factors that range from 100 to 3000 VDC. All modules deliver up to 1.5 W of power from a 12 or 24 VDC input. Single-output positive or negative polarities are available. Reversed input polarity, intermittent-output, and open-/short-circuit protection is standard. Choose from non-isolated and isolated output options and select shielded or unshielded configurations to guard output from external radiated emissions.

Benefits

  • Simplify high voltage subsystem design
  • PCB size and enclosure packaging requirements
  • Upgrade module and system performance without changing PCB layout
  • Increase power subsystem robustness
  • Add protection from line noise and external RF emissions

Features

  • Single pin provides both module power and control of high voltage output
  • Compact, low-profile, PCB-mountable package
  • Selection of high voltage outputs: 100 to 3000 VDC, positive or negative polarity
  • Input polarity protection; output protection from intermittent open- or short-circuits
  • Available input/output isolation to 100 VDC, metal shielding options

Electrical

Input Voltage 12 or 24 VDC (positive polarity only)
High Voltage Outputs Single (positive or negative polarity)
Maximum Power Output 1.5 W (all models)
Temperature Coefficient 300 ppm/⁰C


High Voltage Output Range

100 Series 17 to 100 VDC
200 Series 34 to 200 VDC
300 Series 50 to 300 VDC
500 Series 84 to 500 VDC
1K 167 to 1000 VDC
1K5 250 to 1500 VDC
2K Series 334 to 2000 VDC
3K Series 500 to 3000 VDC


Ripple

100 Series < 5000 ppm
200 Series < 5000 ppm
300 Series < 5000 ppm
500 Series < 5000 ppm
1K < 5000 ppm
1K5 < 5000 ppm
2K Series < 5000 ppm
3K Series < 5000 ppm


Environmental

Operating Temperature Range -40 to 65⁰C (-40 to 149⁰F) case temperature
Storage -55 to 105⁰C (-67 to 222⁰F) case temperature
Humidity 0 to 95% RH, non-condensing


Mechanical

L x W x H 38 x 38 x 20 mm (1.5 x 1.5 x 0.79 in)
Volume 29 cm3 (1.8 in3)
Weight 60 g (2.1 oz)


Interface

Interface Proportional (positive or negative polarity)
Control Signal Levels Voltage: 1 to 12 VDC or 2 to 24 VDC (full-scale) depending on module-supply voltage
Control Accuracy Voltage Output: ±10% (<20% max)


Options & Accessories

Shields Six-sided, tin-plated case and mating PCB for additional protection from external radiated emissions
Isolation Up to 100 VDC maximum between ground and high voltage return (HVret)