Advanced Energy’s UltraVolt D high voltage DC-to-DC supplies provide power in a low-profile, PCB-mountable package.
- Maximum Output Voltage/Power: 6 kV DC/6 W
- Type: Single output
- Ripple: < 200 ppm
- Control Interface: Analog
- Temperature Coefficient: 100 ppm/⁰C
Overview
-
Designed for your low-profile applications, the Ultravolt D series features four models from 1000 to 6000 V in either single-output positive or negative polarities. The modules deliver up to 6 W of power from a 15 or 24 VDC input. Protection against reversed input polarity and module over-temperature is standard. Manage high voltage and current output with an analog interface.
Benefits
- Achieve higher precision control compared to proportionally-controlled high voltage supplies
- Enhance application performance with responsive, high voltage output control
- Automatically shut down system if module case temperature is exceeded
- Increase power subsystem robustness and reliability
- Meet product packaging requirements
Features
- Small-footprint, PCB-mountable package
- High voltage control and monitoring accuracy better than 0.2%
- Analog interface with integral voltage control and voltage/current monitors
- Over-temperature protection disables output if module case > 75°C
- Reversed polarity, short-circuit/arc, and overcurrent protection
Electrical
| Input Voltage | 24 VDC (positive polarity only) |
| High Voltage Outputs | Single, positive, negative, or bipolar polarity |
| Maximum Power Output | 25 ppm/⁰C (10 ppm/⁰C optional) |
| Temperature Coefficient | 100 ppm/⁰C |
High Voltage Output Range
| 1D | 0 to 1000 VDC |
| 2D | 0 to 2000 VDC |
| 4D | 0 to 4000 VDC |
| 6D | 0 to 6000 VDC |
Ripple
| 1D | < 200 ppm |
| 2D | < 200 ppm |
| 4D | < 200 ppm |
| 6D | < 200 ppm |
Environmental
| Operating Temperature Range | -10 to 65⁰C (14 to 149⁰F) case temperature |
| Storage | -10 to 70⁰C (14 to 156⁰F) case temperature |
| Humidity | 0 to 95% RH, non-condensing |
Mechanical
| Case Construction | Tin-plated steel |
| Dimensions | Product size varies by model and power output. See data sheet. |
| Encapsulation | Silicone-based RTV |
Interface
| Interface | Analog (positive or negative polarity) |
| Control Signal Levels | Voltage: 0 to 5 VDC (full-scale), Current: Monitor only |
| Control Accuracy | Voltage Output: ± 0.1% |
| Monitor Accuracy | Voltage/Current Output: ± 0.2% |
| HV Output Enable/Disable | Yes |
