MegaPAC Family

Configurable AC/DC Power Supply with 1-24 Output and up to 2400 Watt

Description

The MegaPAC Family from Vicor’s Westcor Division consists of eight fan-cooled, configurable power supplies that enable users to factory configure almost any set of output requirements by combining appropriate slide-in output assemblies called ConverterPACs, with the appropriate chassis. The MegaPAC chassis has a standardized feature-laden front end with slots to accept the ConverterPACs. Models are available with single or three-phase AC inputs. MegaPACs will also operate from high-voltage DC input. Features include EMI / RFI filtering, enable / disable, general shut down, output sequencing. and AC OK.

* Westcor’s Vantage Line is priced at approximately 15% below standard one piece price. It provides a new, affordable power option for power designers who may not need to meet certain specifications.

Specifications

Output Voltages:
  • 2–95 Vdc
Output Power:
  • 25–4,000 Watts
Efficiency:
  • >80%
Dimensions:
  • See mechanical drawing on data sheet

Features

  • RoHS compliant
  • User and field-configurable outputs
  • DC input capability
  • Power factor corrected (some models)
  • Up to 40 outputs
  • Low ripple 10 mV p-p or 0.15%, whichever is greater (some models)
  • Fan cooled
  • Low leakage option available (some models)
  • Current sharing available
  • Vantage Line available *

Mechanical Drawings

Drawing Number Description RoHS Technical Drawing
08-040831 Outline Drawing for Autoranging MegaPAC
PDF |DXF
08-040921 Outline Drawing for Mini MegaPAC
PDF |DXF
08-130063 Outline Drawing for 4kW MegaPAC-EL
PDF |DXF
08-130080 Outline Drawing for 4kW MegaPAC
PDF |DXF
08-130243 Outline Drawing for PFC MegaPAC-HP and MegaPAC-HP
PDF |DXF
08-130249 Outline Drawing for PFC MegaPAC-HPEL and MegaPAC-HPEL
PDF |DXF

Air Block

Description P/N RoHS Technical Drawing
Air Block 96-00032-01

Bus Bars

Description P/N
2-Hole Bus Bar
3-Hole Bus Bar
4-Hole Bus Bar
5-Hole Bus Bar
Series Bus Bar
88-00033-01
88-00033-02
88-00033-03
88-00033-04
88-00043

Connector Kits

Description P/N RoHS Technical Drawing
Connector Kit for PFC MegaPAC 19-130040
Connector Kit for PFC MegaPAC-EL 19-130040
Connector Kit for PFC MegaPAC-HPEL 19-130040
Connector Kit for PFC MegaPAC-HP 19-130040
Connector Kit for Mini MegaPAC 19-130040
Connector Kit for Autoranging MegaPAC 19-130040
Connector Kit for 4kW MegaPAC 19-130041
Connector Kit for 4kW MegaPAC-EL 19-130041
Connector Kit using DualPAC and DualQPAC 19-130042
Connector Kit using FlexPAC 19-130065

Current Share Boards

Description P/N RoHS Application
Note
CSB for Vicor supplies using VI-200 and VI-J00 modules CSB-01 PDF
CSB for Vicor supplies using Maxi, Mini and Micro modules CSB-02 PDF

Description ConverterPACs

ConverterPACs are the family of slide-in output assemblies used in MegaPAC Power Supplies. There are currently 13 ConverterPACs available for use. Most ConverterPACs of the same length are interchangeable within a MegaPAC and between different AC input MegaPAC chassis. They can be added, moved, or changed as necessary.

ConverterPACs incorporate VI-200 or VI-J00 and / or Maxi Vicor DC-DC converter bricks. For additional power, ConverterPACs can be paralleled. Some ConverterPACs are available for low-noise applications (VXI options, RamPACs and QPACs) and as current sources (BatPACs). All ConverterPACs can be easily removed in the field by loosening a single screw and sliding the unit out of the chassis.

Specifications of ConverterPACs

Output Voltages:
  • 2 – 95 Vdc (higher through series arrays)
Output Power:
  • Up to 600 W
Efficiency:
  • 80 – 90%

Features of ConverterPACs

  • RoHS compliant (see individual data sheets for associated RoHS letter)
  • DC OK / Power Good option available
  • Adjustment ranges from 50% to 110% of nominal on some models
  • Low noise options to 10 mV p-p or 0.15% whichever is greater on some models
  • Current source outputs available