Delta Elektronika manufactures power units which today are an integral component in equipment found all over the world. The power supply is a minor part of any equipment and often taken for granted. For many it is just the electronic `box` and usually ordered at the last moment. At the same time any power supply will be expected to supply the demands of the equipment it is driving.
Our products have been designed to meet the challenges of today’s demanding equipment. Since it’s inception in 1959, Delta Elektronika has been designing and producing power supplies and has become a leader in a market that demands efficiency and reliability. An ongoing research programme has resulted in production designs that can meet an ever increasing number of specifications. Tracking Mode, Master-Slave Configuration, Active PFC, Clean Current, Low Ripple are terms frequently used to describe our units. Delta Elektronika produces world class DC power supplies.
The unique design concept has a strong emphasis on excellent technical specifications and long life. As a result of that concept the units produce about 10 – 30 times less electromagnetic interference, react more than 10 times faster on load transients, produce hardly audible noise and have a very long life at the rated power. All our power supply units are thoroughly tested before being dispatched to the customer. All this ensures the long term correct functioning of each unit and client satisfaction.
Product Matrix Delta Elektronika BV (Poland only)
Image
Description
Datasheet
Power
Voltage Range
Current Range
-
- 3-Phase Input 380/400/415 Vac
- 19″ Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
6000 Wup to 600 Vdcup to 400 A -
- 3-Phase Input 380/400/415 Vac
- 19″ Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
3000 Wup to 300 Vdcup to 200 A -
- Single Phase Input: 90-265 Vac
- 19″ Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
1500 Wup to 400 Vdcup to 100 A -
- Single Phase Input: 90-265 Vac
- 19″ Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
800 Wup to 400 Vdcup to 80 A
Image
Description
Datasheet
Power
Voltage Range
Current Range
-
- Single Phase Input 92-265 Vac
- 19″ Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
300 W0 – 30 V0 – 10 A -
- Single Phase Input 90-265 Vac
- 19″ Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
150 Wup to 300 Vup to 10 A -
- Single Phase Input 90-265 Vac
- 3 independent, floating outputs
- Very low output ripple and spikes
- EN60950 and EN61010
150 W2x 0 – 20 V
0 – 10 V0 – 2.5 A
0 – 5 A
Image
Description
Datasheet
Power
Voltage Range
Current Range
-
- 1-Phase Input 99-132/198-264Vac
- Redundant Parallel Operation
- Parallel and Series Operation
- EN60950 and EN61010
1200 W3 outputs
up to 60 V3 outputs
up to 60 A -
- 1-Phase Input 99-132/198-264Vac
- Redundant Parallel Operation
- Parallel and Series Operation
- EN60950 and EN61010
600 W3 outputs
up to 30 V3 outputs
up to 30 A -
- 1-Phase Input 100-132/195-265Vac
- Euro Rack Mounting or Eall Mounting
- Output programmable from 0 – max.
- EN60950 and EN61010
280 Wup to 28 Vup to 40 A -
- 1-Phase Input 100-132/195-265Vac
- Euro Rack Mounting or Eall Mounting
- Parallel and series operation
- EN60950 and EN61010
240 Wup to 30 Vup to 12 A -
- 1-Phase Input 100-132/185-264Vac
- Euro rack or wall mounting
- Single or Dual Outputs
- EN60950 and EN61010
75 W / 150 Wup to 200 Vup to 26 A -
- 1-Phase Input 230 / 115 Vac
- Eurocard, Rail or Wall Mounting
- Adjusting Output Voltage
- EN60950 and EN61010
6 Wup to 30 Vup to 1 A
Image
Description
Datasheet
-
Interface between Ethernet IP Network and Power Supply. 16-bit accuracy for voltage and current programming or output monitoring.
-
Interface between CANopen Bus System and Power Supply. 14-bit accuracy for voltage and current programming or output monitoring.
-
Interface between PROFIBUS DP Bus System and Power Supply. 14-bit accuracy for voltage and current programming or output monitoring.
-
Interfaces between Computer and analog programmable Power Supply. 14-bit accuracy for voltage and current programming or output monitoring.
-
Interfaces between Computer and analog programmable Power Supply. 14-bit accuracy for voltage and current programming or output monitoring.
-
4-channel analog isolation amplifier for galvanic isolation when analog programming or monitoring Power Supply.
-
Adapter for connecting Power Supplies in Master / Slave series mode.
-
Under- and overvoltage alarm circuit.





